TS-4530A/UPM Mode 5 Upgrade Description

The TS-4530/UPM Upgrade Kit will be a two piece sub-assembly with all operating software installed on the primary sub-assembly and ready for final calibration

Primary Top Cover Sub-assembly Description

The existing top cover will be replaced with a new top cover that will contain the housing for the crypto with hinged crypto cover, new color OLED display, GPS Antenna, single PCB (printed circuit board), auxiliary power connector, RS-232 connector, and USB connector. 

The new single board includes the RF, digital and power supply circuitry. The current TS-4530/UPM power supply, digital and RF boards will be replaced by the new single PCB.  Power for the KIT/KIR, KIV-77 and KIV-78 will come from a new power supply incorporated on the single PCB design. 

The new top cover will also include a crypto housing flip up front door with integrated GPS antenna, as well as a master USB, RS-232, 9 pin D Type connector and auxiliary power connector (See figure 1). 

With all pieces of the primary upgrade attached to the new top cover it will be very simple to install.  The two piece upgrade sub-assemblies can be installed with minimal training in less than 30 minutes as described in the upgrade kit installation procedure summary following.

Switch Housing Sub-assembly Description

The current switch housing will be removed and Tel will provide a new switch housing that will contain switches S-1, S-2, and S-3.  Switches S-1 and S-2 will be identical to the current switches used in the TS-4530 while S-3 will be changed to a new tactile switch. 

The new tactile switch can act and operate exactly like the old S-3 when pressed.  In addition the new S-3 will also have (4) direction capability meaning the operator can move the activation cursor on the display up/down or left/right by pushing the switch accordingly.  It retains the form fit and functions of the old S-3 switch while providing a more efficient way to control the activation cursor and can be easily operated while wearing NBC gear.

The new tactile switch is highly reliable and will be protected with environmental boot to protect from moisture, dirt and EMI emissions. 

NSN 6625-01-573-3586

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States. 

Description

The AN/USM-708 is the next generation in ground support equipment test equipment.

Based on entirely new up-to-date technology and digital architecture, the AN/USM-708 is a leap forward in precision testing of the following systems:

• Transponder: Modes 1, 2, 3/A, C, 4 Mode S, EHS (Enhanced Surveillance) and Mode 5
  
• Interrogator: Modes 1, 2, 3/A, C, 4, Mode 5
  
• TCAS & EHS ADS-B (Automatic Dependent Surveillance Broadcast)
  
• Navigation: VOR, ILS, LOC, GS, MB
  
• Communication: LINK-4 (Expandable)
  
• Sonobouy Simulation
  
• TACAN/DME
  
• VSWR
  

NSN 4920-01-541-2764 

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.
 

Description

• The AN/USM-719 is the next generation in ground support aviation ramp test equipment.
  
  Based on entirely new up-to-date technology and digital architecture; the AN/USM-719 large 6.0 in. color LCD screen and surrounding soft-keys and keyboard provides easy and quick access to a multiple of test screens menus, and display options affording single man operation, instant results, and a host of pre-programmed and manually variable parameters to meet the most demanding requirement’s for testing of airborne avionic and navigation equipment.
  
  The AN/USM-719 provides precision testing of the following systems:
  
  • Transponder: Modes 1, 2, 3/A, C, 4 Mode S, EHS (Enhanced Surveillance) and Mode 5 (Levels 1 & 2)<
  • Interrogator: Modes 1, 2, 3/A, C, 4, Mode 5 Levels (1 & 2), TCAS (S & C) & ETCAS
  • ADS-B (Automatic Dependent Surveillance Broadcast
  • TACAN – G/A, A/A, and A/A BCN
  • VSWR

Built-in KIV-78 Powered Bay.

The AN/USM-719 can be factory upgraded to the AN/USM-708.

NSN 6625-01-565-2569

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.

Description

The TS-4530A, which has been upgraded and manufactured by Tel-Instrument, is the latest version of the respected AN/APM-424 and TS-4530 test set providing simple to use “GO/NO-GO” operation. The TS-4530A, developed under a U.S. Army contract, now tests IFF Mode 5, EHS, and TCAS. The TS-4530A includes a large 8 line, color display and a new 3-button switch assembly that adds a 4-way directional toggle action for improved usability.   The upper housing includes a built-in KIV-77 CCI appliqué enclosure. 

Based on a new, highly integrated digital architecture; the TS-4530A performs the following tests:

• Transponder: Modes 1, 2, 3/A, C, 4 Mode S, EHS (Enhanced Surveillance) and Mode 5 (Levels 1 & 2)
  
• Interrogator: Modes 1, 2, 3/A, C, 4, Mode 5 (Levels 1 & 2)
  
• TCAS (S & C) & ETCAS, TIS-B 
  

NSN 6625-01-562-0715

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States. 

 
  

Description

The TR-420 (Multi-function including Mode 5) Ramp Test Set is the next generation of avionics support equipment. The TR-420 is a battery powered portable unit used to test the operation of Transponders and Interrogators including: IFF (with Mode 5) Mode S Transponders, EHS, and ADS-B. TACAN/DME, ADS-B Transmit/Receive and TCAS testing functionality are also offered as part of the standard test set capability. Tests of both Transponders and Interrogators can be performed by using the TR-420 hand held antenna to radiate to and from the unit-under-test (UUT) or by directly connecting to the UUT antenna port. The TR-420 employs a user interface with a large 5.7 in. color LCD screen and surrounding soft-keys. This allows for easy and quick access to a multiple of test screens menus and display options.

NSN 6625-01-570-9588

The TR-420 can be factory upgraded to the AN/USM-708.

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States. 
 

Description

The AN/ARM-206 is the industry’s first fully automated TACAN Test Set and is designed for depot and intermediate level support. The AN/ARM-206 meets all requirements for evaluating the performance and accuracy of airborne TACAN UUT’s. The AN/ARM-206 generates signals that accurately simulate TACAN beacon signals to both the normal X and Y surface-to-air modes, as well as signals of an interrogating or complementary aircraft in X or Y air-to-air modes, including inverse mode. Easy to use color touch screen interface allows for simple changes to parameters and testing signals providing unsurpassed versatility.

The AN/ARM-206 measures fixed or varying range and bearing performance, including search/track ability, transmitter power output, receiver sensitivity and coding and decoding parameters on all TACAN channels and air-to-air range and bearing performance.

NSN 4920-01-553-8144

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.
 

Description

The T-47NC and T-47NH Multifunction Ramp Test Set is a battery powered portable unit used to test the operation of Transponders and Interrogators including: Mode S Transponders, TCAS Interrogators, and TACAN/DME equipment that are installed in aircraft and other vehicles. Tests of both Transponders and Interrogators can be performed by using the T-47NC/NH directional antenna to radiate to and from the unit-under-test (UUT) or by directly connecting to the UUT antenna port.

The T-47N provides test capability for Mode S Elementary and Enhanced Surveillance.  The T-47N can receive and display information contained in Mode S DF-17 Extended Squitter (ADS-B).

The T-47NC/NH is self-contained comprising of a built-in battery charger and all accesories are neatly stored within the removable cover. An easy to understand front panel interface controlled by the use of toggle switches with an easy to read display makes use simple and requires little or no training. The supplied directional antenna with an active LED and optical sight is used for both interrogator and transponder testing. The battery is installed and removable through the front panel.  Utilize a KIR/KIT computer module or interchange it with a KIV-6 module which fits neatly in the provided bay.

NSN 6625-01-482-4577

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.

Description

The T-47G Multi-Function Ramp Test Set is a battery powered portable unit used to test Interrogators, Transponders including Mode S and IFF, TACAN/DME, and TCAS equipment which are installed in aircraft and other vehicles.  Now with EHS.

Tests of both Transponders and Interrogators can be performed by using the supplied Directional Antenna to radiate signals to or from the Unit Under Test (UUT), or by directly connecting to the UUT antenna port.

The T-47G is completely self-contained comprising of a built-in battery charger and all accesories stored with in the removable cover. An easy to understand and operate front panel interface, controlled by the use of toggle switches, and an easy to read display, makes use simple and requires little or no training. The Directional Antenna with an active LED display and optical sight is used for both Interrogator and Transponder testing. The battery is installed and removable through the front panel.

Accessories include the following:

1. AC Power, DC Power and RS-232 Cable
2. KIT/KIR Cable
3. RF Direct Connect Cable
4. RF Antenna Extension Cable
5. Antenna

NSN 6625-01-525-8166

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.

Description

The T-36M is a rugged, user-friendly high-precision instrument for rapid functional testing and calibration of military VOR, LOC/GS, MB and low-mid-high-VHF/UHF COMM avionics equipment. The T-36M can be operated in either the knob/switch mode, providing an operator dressed in protective clothing with accurate go-no-go testing on the flight line, or the keyboard mode, providing full function testing and diagnostics. Further flexibility is provided by the T-36M’s ability to store three pre-selected carrier frequencies and output power levels for each operational mode of unit. These test frequencies can be selected to suit the signal environment at the testing location. The keyboard provides complete control of most parameters, resulting in a high level of unit flexibility.

NSN 4920-01-504-5258

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.

Description

The TR-100AF is a easy to operate, and rugged ramp test set used to verify airborne TACAN equipment. Full selectability of bearing, range, frequency, and velocity to custom program TACAN test scenarios. Built in Batttery Charger with front panel access. Direct Connect Capabilities for accurate measurements of power and frequency.

NSN 6625-01-578-4893 RH



EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.

Description

The T-30CM Ramp Test Set is designed for one man operation of the VOR, MB, GS, LOC, flight director, and autopilot from the cockpit or flight deck.

The unit functions by radiating controllable RF signals directly into the aircraft's antennas. The unit will permit compliance with CAT III periodic ramp check certification.

The T-30CM is simple and straightforward in operation and functions primarily as a "go/no go" test set. The T-30CM provides test capability to insure primary navigation instruments are functional and meet their required accuracies.

NSN 6625-01-421-5845

EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.

 

Description

The AN/APM-480A Transponder, Interrogator, TCAS Test Set provides unsurpassed reliability, and state of the art accurate testing of airborne Transponders, Interrogators, and TCAS systems. Proven "In the Field" ruggedness, an easy to use operator interface and displayed results will provide the operator with unrivaled capability and results.

NSN 6625-01-518-1806



EXPORT CONTROL WARNING: This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.